Products

Stainless Steel Dutch Mesh

Plain Dutch Mesh

Plain dutch weave pattern is the same as plain weave, but the weft wires are of smaller diameter than the warp wires. The wires are woven tightly together resulting in a small triangular opening. This weave produces a strong cloth with a small open area and greater strength with a good flow rate to make it suitable for high pressure filtration.

The shapes and position of the openings aid particle retention and increase filter cake formation. Plain dutch weave mesh is most frequently used for high pressure filtration processer to separate from other medium in industry of spaceflight, petroleum, hemical, etc.

Twill Dutch Mesh

Twill Dutch Weave is similar to plain dutch weave but it uses a double layer of weft wires woven as a twill pattern. Dutch weave is very strong to support greater loads and finer openings than the plain dutch weave mesh with a controlled flow rate and is suitable where high pressure filtration is required.

The shapes and position of the openings aid particle retention and increase filter cake formation. Plain dutch weave mesh is most frequently used for high pressure filtration processer to separate from other medium in industry of spaceflight, petroleum, hemical, etc.

Twill dutch weave mesh is most frequently used in applications where the filtering of heavy material necessary. Such as aerospace industry, petroleum and chemical industry, beer, machines, etc.


Stainless Steel Dutch Woven Mesh
Weave Type
Mesh Count
Warp Wire  (Inch)
Weft Wire (Inch)
Absolute Rating
(Micron)
Nominal Rating
(Micron)
Weight per 100 sq.'
PDW
8x20
0.014
0.0126
330-350
280
49
PDW
12x64
0.024
0.0165
270-290
200
84
PDW
14x88
0.02
0.013
220-240
150
75
PDW
16x80
0.0196
0.0134
225-235
140
79
PDW
24x110
0.015
0.01
115-125
80
55
PDW -
24x128
2 x .010
0.004
110-120
75
34
PDW
30x150
0.009
0.007
110-112
63
33
PDW -
30x150
2 x .009
.007"
95-113
60
33
PDW
40x200
0.007
0.0055
70-75
55
27
PDW
50x250
0.0055
0.0045
58-63
40
22
PDW
80x400
0.005
0.003
40-45
35
17
TDW
30x250
0.01
0.008
110-120
53
66
TDW
80x700
0.004
0.003
35-40
25
25
TDW
120x400
0.004
0.0025
50-55
40
15
TDW
165x800
0.0028
0.002
25-28
15
14
TDW
200x600
0.0024
0.0018
30
20
10
TDW
165x1400
0.0028
0.0016
16-20
10
14
TDW
200x1400
0.0028
0.0016
12-14
5
15
TDW
325x2300
0.0014
0.001
8-9
2
10
TDW
400x2800
0.001
0.0008
6-7
1
8


Twilled Reversible Dutch Wire Mesh

This filter screen is woven from high-tensile strength stainless steel wire, in reverse dutch twill pattern and finished in ribbon/belt form with a standard roll length of 10 meters. So it is called with belt filter screen or screen filter belt for screen changer or auto screen belts.

The yield of such a roll is equivalent to several hundred ‘screen packs’ in a conventional screen changer and lasts many months in non-stop operation.


    Features:
    1. High precision filtration, Good solvent resistance
    2. Corrosion resistance, Chemical resistance, Good heat-melting resistance
    3. No fluctuation of material flow, no product deformation, excellent quality stability
    4. No waste product or waste material, and little material consumption occur when the screen changer works.

    Applications:

    PFM Screen offers wide range filter screens for automatic, continuous screen changers used for polymer melt filtration in every segment of plastics

    Processing including: blown film, blow molding,

    Sheet and film extrusion, filaments & fibers, pipe and profile, pelletizing, BIAX (BOPP and BOPS).

     

    Specifications:

    Belt Filter Screen For Extruder
    Mesh/inch
    Wire Dia.(mm)
    Width(mm)
    Length/Roll(m)
    72/15
    0.45/0.55
    97---400
    10/20
    120/15
    0.35/0.45
    97---400
    10/20
    132/17
    0.32/0.45
    97---400
    10/20
    150/17
    0.3/0.45
    97---400
    10/20
    152/24
    0.27/04
    97---400
    10/20
    170/17
    0.27/0.45
    97-400
    10/20
    180/18
    0.27/0.45
    97-400
    10/20
    200/40
    0.17/0.27
    97---400
    10/20
    260/40
    0.15/0.25
    97---400
    10/20